How much do you know about PTFE pleated filter cartridge?
Views : 6044
Update time : 2019-02-20 10:27:28
How much do you know about PTFE Pleated Filter Cartridge? PTFE membrane filter cartridge is with hydrophilic or hydrophobic membrane, hot melted with PP core or stainless steel core. Good integrality, free of surfactants. It can be used for gas and liquid filtration. SIIC-M025 from Shanghai Indro Industry Co., Ltd is special PTFE pleated filter cartridges production line, the whole process include pleats making, pleats length cutting, middle seam welding, cap welding, fitting end welding, length connector welding.
-Features and Benefits Strong hydrophobicity;
Absolute filtration under the wet environment;
Wide chemical compatibility, resistant to strong alkali, acids, aggressive gases and solvents, ozone;
Geometrically unique pores, long service life, excellent performance
High temperature endurance performance
Biological safety and good pyrogen control
Irreplaceable filter materials.
All products have passed 100% integrity testing.
-Micron Rating（µm）: 0.10 0.20 0.45 1.00 5.00
-Typical Applications 1. Tank vent, Fermentation air;
2. Compressed air, CO2 line sterile filtration;
3. Air filtration in aseptic packaging;
4. Aggressive acids, Bases, Solvents;
5. Photoresists, Etch Solutions;
-Materials of Construction Filter Media: PTFE
Support Layer: Polypropylene
Inner Core: Polypropylene
Outer Core: Polypropylene/Stainless Steel
-Operation Conditions Normal Operating Temperature: ≤65℃ Max. Operating Temperature: 90℃(△P≤0.10Mpa)
Max. Differential Pressure: Normal Flow direction：4.2 bar at 25℃ Reverse Flow direction: 2.1 bar at 25℃ Steam Sterilization for 30 minutes at 140±2℃ PH Value compatibility: 1-14
-Cartridge Safety Endotoxin: ＜0.25 EU/ml
Extractable: 0.03g/10”
-PTFE pleated filter cartridge making process: SIIC-M025 from Shanghai Indro Industry Co., Ltd is special PTFE pleated filter cartridges production line, the whole process include pleats making, pleats length cutting, middle seam welding, cap welding, fitting end welding, length connector welding.
