Categories
PPS (polyphenylene sulfide) series filter materials products
PPS needle-punched filter felt has a temperature resistance of 190-210 degrees Celsius. PPS needle-punched filter roll is the best filter material with acid resistance, alkali resistance and hydrolysis resistance.
May 13th,2019
14135 Views
PPS (polyphenylene sulfide) series filter materials products:
Procon® is a registered trademark of PPS fiber of Japan Toyotta Textile Company in China.
Torcon® is a registered trademark of PPS fibers of Japan Toray Company in China
PPS needle-punched filter felt has a temperature resistance of 190-210 degrees Celsius. PPS needle-punched filter roll is the best filter material with acid resistance, alkali resistance and hydrolysis resistance, but its anti-oxidation ability is not good and it can not be used in the case of excessive oxygen content. PPS needle-punched filter felt is mainly used in waste incinerator, power plant boiler, industrial boiler and coal-fired industrial furnace.
Weight
(gsm) |
Structure
(felt layer/scrim) |
Thickness
(mm) |
Air
permeability （m3/m2·min）
at 127MM H2O |
Tensile strength （N/5×20cm） |
Tensile elongation （%） |
Temperature （℃） |
| Warp |
Weft |
Warp |
Weft |
Continuous |
Surge |
| 500 |
PPS\PPS staple fiber |
1.8 |
15 |
> 1000 |
> 1500 |
<20 |
<40 |
≤ 190 |
210 |
| 550 |
PPS superfinne\PPS |
1.8 |
10-12 |
> 1000 |
> 1500 |
<20 |
<40 |
≤ 190 |
210 |
| 550 |
PPS+P84\PPS high strength and low elongation scrim |
1.8 |
10 |
> 1200 |
> 1300 |
<20 |
<30 |
≤ 190 |
230 |
