How much do you know about PP pleated filter cartridge?
Views : 6510
Update time : 2019-01-24 16:11:51
How much do you know about PP pleated filter cartridge? PP pleated filter cartridge is made of pleated polypropylene membrane, polypropylene non-woven fabrics and polypropylene cage. During the production, it is purity, free of surfactants, resins, binders and adhesives. It can be used for the liquid and gas prefiltration and clarification. SIIC-M025 from Shanghai Indro Industry Co., Ltd is special machines for making PP pleated filter cartridges, it is complete pleated filter cartridge production line, including pleats making, pleats length cutting, middle seam welding, cap welding, fitting end welding and length connector welding.
- Features and Benefits 100% high quality polypropylene material;
Wide chemical compatibility
High flow rate
Low differential pressure
High dirt holding capacity
High nominal filtration precision
Long using life
Economical choice for the prefiltration and guard filtration before critical filtration
Board range of micron ratings
Suitable for various filtration.
Meet the current FDA after cleaned and flushed with Pyrogen-free water.
- Micron Rating（µm）:
0.10 0.20 0.45 1.00 3.00 5.00 10.0 20.0 40.0 50.0 100
-Typical Applications 1. Pharmaceuticals, APIs, Biologics; Solvent; Compressed air filtration;
2. Plating solutions, Ink;
3. Fine Chemicals;
4. Food & Beverages, Wine, Beer, Mineral Water;
5. Semi-Conductor, LCD Display, Discs, R.O. prefiltration
6. Clarification of waste water treatment.
- Materials of Construction Filter Media: Polypropylene
Support Layer: Polypropylene
Inner Core: Polypropylene
Outer Core: Polypropylene
-Operation Conditions Normal Operating Temperature: ≤55℃ Max. Operating Temperature: 80℃(△P≤0.10Mpa)
Max. Differential Pressure: Normal Flow direction：4.2 bar at 25℃ Reverse Flow direction: 2.1 bar at 25℃ Steam Sterilization for 30 minutes at 121±2℃ PH Value compatibility: 1-13
-Cartridge Safety Endotoxin: ＜0.25 EU/ml
Extractable: 0.03g/10” -Production process of PP pleated filter cartridges The complete pleated filter cartridge production process includes pleats making, pleats length cutting, middle seam welding, cap welding, fitting end welding and length connector welding. SIIC-M025 from Shanghai Indro Industry Co., Ltd is special machines and production line for making PP pleated filter cartridges,
How much do you know about PP pleated filter cartridge?
PP pleated filter cartridge is made of pleated polypropylene membrane, polypropylene non-woven fabrics and polypropylene cage. During the production, it is purity, free of surfactants, resins, binders and adhesives. It can be used for the liquid and gas prefiltration and clarification. SIIC-M025 from Shanghai Indro Industry Co., Ltd is special machines for making PP pleated filter cartridges, it is complete pleated filter cartridge production line, including pleats making, pleats length cutting, middle seam welding, cap welding, fitting end welding and length connector welding.
- Features and Benefits 100% high quality polypropylene material;
Wide chemical compatibility
High flow rate
Low differential pressure
High dirt holding capacity
High nominal filtration precision
Long using life
Economical choice for the prefiltration and guard filtration before critical filtration
Board range of micron ratings
Suitable for various filtration.
Meet the current FDA after cleaned and flushed with Pyrogen-free water.
- Micron Rating（µm）:
0.10 0.20 0.45 1.00 3.00 5.00 10.0 20.0 40.0 50.0 100
-Typical Applications 1. Pharmaceuticals, APIs, Biologics; Solvent; Compressed air filtration;
2. Plating solutions, Ink;
3. Fine Chemicals;
4. Food & Beverages, Wine, Beer, Mineral Water;
5. Semi-Conductor, LCD Display, Discs, R.O. prefiltration
6. Clarification of waste water treatment.
- Materials of Construction Filter Media: Polypropylene
Support Layer: Polypropylene
Inner Core: Polypropylene
Outer Core: Polypropylene
-Operation Conditions Normal Operating Temperature: ≤55℃ Max. Operating Temperature: 80℃(△P≤0.10Mpa)
Max. Differential Pressure: Normal Flow direction：4.2 bar at 25℃ Reverse Flow direction: 2.1 bar at 25℃ Steam Sterilization for 30 minutes at 121±2℃ PH Value compatibility: 1-13
-Cartridge Safety Endotoxin: ＜0.25 EU/ml
Extractable: 0.03g/10” -Production process of PP pleated filter cartridges The complete pleated filter cartridge production process includes pleats making, pleats length cutting, middle seam welding, cap welding, fitting end welding and length connector welding. SIIC-M025 from Shanghai Indro Industry Co., Ltd is special machines and production line for making PP pleated filter cartridges.
